Snap on generic COP flag

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
GRUSS
TwoWaves
TwoWaves
Posts: 119
Joined: Tue Dec 27, 2011 11:16 pm

Snap on generic COP flag

Post by GRUSS »

Hello
Finally received my snap on COP flag.

http://buy1.snapon.com/catalog/item.asp ... ir=catalog

What leads/connections will I need to hook it upto the pico. I've had a look on the maplins site but I'm a little confused :?

Thanks guys

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: Snap on generic COP flag

Post by Martyn »

Looks like a phono style connector so "phono to bnc" might be worth googling :)
Martyn
Technical Support Manager

GRUSS
TwoWaves
TwoWaves
Posts: 119
Joined: Tue Dec 27, 2011 11:16 pm

Re: Snap on generic COP flag

Post by GRUSS »

BNC to BNC Cable with Earth Clamp (TA033)

http://www.maplin.co.uk/search?criteria=Phono+to+bnc

The flag has a male and female phono connection. If I use the pico TA033 lead then the top left one on the maplins site. What do I do with the other side? :?

Martyn
Pico Staff Member
Pico Staff Member
Posts: 359
Joined: Thu Aug 11, 2011 7:43 am
Location: Cambridgeshire

Re: Snap on generic COP flag

Post by Martyn »

These are designed to be chained together so the spare side should be left free.
Martyn
Technical Support Manager

GRUSS
TwoWaves
TwoWaves
Posts: 119
Joined: Tue Dec 27, 2011 11:16 pm

Re: Snap on generic COP flag

Post by GRUSS »

Martyn wrote:These are designed to be chained together so the spare side should be left free.
Ahhh I understand now! So it doesn't matter which side I connect up to the scope then? I could just join 2 normal leads together to create a connection. I read about it with pico's COP probe.
I'll probably just get the TA033 though :D

Post Reply