Time scale in degrees Engine

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
LucaB
OneWave
OneWave
Posts: 39
Joined: Tue Nov 24, 2009 5:53 pm
Location: Italia

Time scale in degrees Engine

Post by LucaB »

Hello Pico, I wanted to ask if you can include in a future time scale also degrees of crank engine.
Or is this already possible to do
Thanks

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: Time scale in degrees Engine

Post by Robski »

Luca

Yes it is possible by placing time cursors on lets say a WPS capture of compression at TDC with two "humps" on the screen then work it out from the time taken to do 720 degrees :wink:

LucaB
OneWave
OneWave
Posts: 39
Joined: Tue Nov 24, 2009 5:53 pm
Location: Italia

Re: Time scale in degrees Engine

Post by LucaB »

Thank you for answer.
I mean something like this
2011-11-29_230306.png
oscilloscope with this setting, even if you accelerate it sees just a phase ignition complete

Post Reply