alfa romeo

Ask any questions about using PicoScope 6 Automotive software here.
Post Reply
nickphelps
Newbie
Posts: 0
Joined: Fri Oct 08, 2010 12:15 pm

alfa romeo

Post by nickphelps »

Hi all I hope someone can help I've got a Alfa Romeo 2.0 GT JTS petrol 2005 , i'm trying to get a waveform for the injectors , any help would be great
Cheers
Nick

User avatar
Robski
Advanced User
Advanced User
Posts: 598
Joined: Tue Sep 14, 2010 6:36 pm
Location: Yorkshire

Re: alfa romeo

Post by Robski »

Hi Nick

Go into automotive at the top of the page on your pico software & it will tell you exactly what to do in there.

HTH

Rob.

ziko
OneWave
OneWave
Posts: 21
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: alfa romeo

Post by ziko »

I think the Alfa Romeo forums would be useful, I personally use Mercedes forums and they tend to be very helpful so I assume the Alfa Forums would be just as useful.

You can measure the injector current using a current clamp and/or you can measure the injector voltage however you would need suitable attenuation like the 20:1 attenuator.


But like Robski says the automotive menu will give you more information. Also of course the Alpha Forums would be great to find out where it is.

Kind regards
Ziko

Technical Specialist

Post Reply