strange signal on cam sensor

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
dieseleng
Newbie
Posts: 0
Joined: Sat Aug 14, 2010 11:04 am

strange signal on cam sensor

Post by dieseleng »

seem to have strange signal on the 3 wire @a cam sensor on a 2006 ford transit 2.4 tdci,can system , and don,t know if its the scope or vehicle palyin up ,the scope is an adc 212 which has been sat gettin dusty for sometime
i have a screen image of the waveforms on all 3 wires @ key off ,key on and running
i will attach the 3 images at running on this post
pin 3 signal wire to ecu
even with the key off and out of ign all 3 wires show 0v then a spike of 5v every 2-3secs which can't be right .
but have noticed the red power light on the adc- 212 flashing ,
can anyone help
please
i can put the other file up if reqired
Attachments
pin 3,running grey-pink  wire.jpg
pin 2 eng running orange  wire.jpg
pin 1,eng running orange green wire.jpg

dieseleng
Newbie
Posts: 0
Joined: Sat Aug 14, 2010 11:04 am

Re: strange signal on cam sensor

Post by dieseleng »

ign off files
Attachments
pin 3,ign off grey-pink  wire.jpg
pin 2,ign off orange  wire.jpg
pin 1,ign off orange green wire.jpg

dieseleng
Newbie
Posts: 0
Joined: Sat Aug 14, 2010 11:04 am

Re: strange signal on cam sensor

Post by dieseleng »

ign on
Attachments
pin 2 ign on orange wire.jpg
pin 3ign on grey-pink  wire.jpg
pin 1,ign on orange green wire.jpg

Post Reply