easy setup

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Alex

easy setup

Post by Alex »

i'm using the adc212, but your automotive demos are all recorded using a adc12? and i can't open it unless i change my setttings.
If the demos in future are saved for different machines like mine then when you open a saved picture then all the x & y settings and probe settings should be automatic be set to use

User avatar
matthew
OneWave
OneWave
Posts: 18
Joined: Wed Sep 25, 2002 9:35 am
Location: Cambridgeshire, UK

Post by matthew »

Sorry to hear, that this seems to have caused problems for you.

This is unfortunately unavoidable, the demo data generation algorithm is designed to be used with the ADC-12. However, when you come to use the actual Automotive Software, all waveforms are recorded with the ADC-212.

I will pass on your comments to the software team as they will probably help to make our demos more useable in future.

Best Regards,
Matt Everett

Pico Software Engineer

Post Reply