rpm in pico scope 6 automotive

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
mathias
Newbie
Posts: 0
Joined: Tue Mar 16, 2010 4:05 pm

rpm in pico scope 6 automotive

Post by mathias »

hello

what is the most easy way to see rpm in picoscope 6 automotiv?
i don`t find any?

regards
mathias

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: rpm in pico scope 6 automotive

Post by Autonerdz »

Mathias,

Frame one revolution with your vertical rulers and then read the RPM in the lower right corner of the screen. 8)

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

mathias
Newbie
Posts: 0
Joined: Tue Mar 16, 2010 4:05 pm

Re: rpm in pico scope 6 automotive

Post by mathias »

Autonerdz wrote:Mathias,

Frame one revolution with your vertical rulers and then read the RPM in the lower right corner of the screen. 8)

hello and thanks
can you please explain ,,do you maybee have i picture i am so bad in english.. (Frame one revolution? )

in the other software (diagnostic) you only need the battery + and -.
and it is the same in bosch kts software..

i can get it if i conect the crank signal,and get the ms in 720 degrees... but is not a easy way

best regards

mathias

_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America

User avatar
Autonerdz
TwoWaves
TwoWaves
Posts: 387
Joined: Wed Nov 20, 2002 4:19 pm
Location: Washington State USA

Re: rpm in pico scope 6 automotive

Post by Autonerdz »

Sure. Here is an image...


_________________
Tom Roberts
(The Picotologist)
http://www.autonerdz.com
skype: autonerdz
THE PicoScope Automotive Authority
In North America
Attachments
rpm1.gif
(66.01 KiB) Downloaded 34 times

mathias
Newbie
Posts: 0
Joined: Tue Mar 16, 2010 4:05 pm

Re: rpm in pico scope 6 automotive

Post by mathias »

hello

thanks for the image. now i get it..

regards
mathias

Post Reply