pico stops engine

Ask any questions relating to the PicoScope hardware or kit contents here.
If you have any questions prior to purchasing the kit post them here.
Post Reply
Guest

pico stops engine

Post by Guest »

Hello everyone,
connected my pico to a vauxhall vectra 2.0 petrol connectoin onto the injector No 1 and it stopped the engine dead and it is now a non starter
their was a slight discharge of smoke on my banana clip at the injector
any one help with this please
tony

User avatar
Matt Fanslow
OneWave
OneWave
Posts: 15
Joined: Wed Aug 01, 2007 8:38 pm
Location: MN

Post by Matt Fanslow »

What model scope are you using and where did you have ALL your leads connected? Are the leads still connected during the non-start? Remember the scope grounds (negative/black) are coupled together, so if any channel has its ground connected, it will provide ground (earth) to all the other channels Thanks! Later, Matt.

Post Reply