Engine and hydraulics diagnostic kit

The Pico Engine and Hydraulics kit combines our Diesel diagnostics kit with two WPS600C Hydraulic pressure transducers, enabling you to accurately and quickly diagnose faults on many different types of mobile machinery. PicoScope has already been chosen by dozens of vehicle and equipment manufacturers because of its unique combination of value, reliability, performance and guidance. 

By combining the high-precision hydraulic transducers with a PicoScope kit, you can now look at hydraulic pressures in the same time frame as the engine control signals giving complete visibility of how the system is operating. You can now see the exact moment valves start to move in the hydraulic system and compare this directly to the relevant electronic controls. You can also investigate stalling and 'no start' conditions due to the comprehensive coverage of engine and electrical systems.

With PicoScope you have direct access to over 150 built-in guided tests covering engine and electrical sensors, actuators and systems. These include both voltage and current measurements and cover camshaft, crankshaft, oxygen sensors, injectors and many more. These tests give you a head start in diagnosing and fixing engine faults right first time; when combined with the hydraulic system they allow diagnosis of complex interactions of the hydraulic and engine systems.

WPS600C Pressure Transducer

With high accuracy and a wide measuring range, the WPS600C Hydraulic Pressure Transducer connects to your PicoScope for convenient analysis and diagnosis of pressurized systems.

• Accurately measure up to 600 bar (8700 psi)
• Ultra-fast 100 microsecond response time (0% to 90% of full scale)
• Internal rechargeable LiPo battery
• Industry-standard M16 x 2 test point connector
• Auto-zeroing
• High noise immunity
• Temperature compensated

Not for continuous operation

Due to the wide range of hydraulic fittings in use, we do not supply any specific adaptors or hoses for use with this product. Those provided with the low-pressure WPS500X are not suitable for use with the higher-pressure hydraulic systems.

We recommend contacting your regular hydraulic hose supplier for any additional fittings or custom hose assemblies you may require to suit your specific system.