WPS600 Hydraulic Pressure Transducer

With high accuracy and a wide measuring range, the WPS600 Hydraulic Pressure Transducer connects to your PicoScope for convenient analysis and diagnosis of pressurized systems.

  • Accurately measure up to 600 bar (8700 psi)
  • Ultra-fast 100 microsecond response time (0% to 90% of full scale)
  • Internal rechargeable LiPo battery
  • Industry-standard M16 x 2 test point connector
  • Auto zeroing
  • High noise immunity
  • Temperature compensated

Not for continuous operation

Due to the wide range of hydraulic fittings in use we do not supply any specific adaptors or hoses for use with this product. Those provided with the low pressure WPS500X are not suitable for use with the higher pressure hydraulic systems.

We recommend contacting your regular hydraulic hose supplier for any additional fittings or custom hose assemblies you may require to suit your specific system.

£689.00 PP833

Pressure ranges

Two pressure ranges for increased versatility
The two pressure ranges of the WPS600 allow accurate measurement and diagnosis of permanent and non-permanent automotive and industrial hydraulic systems.

Range 1
The first range, 0 to 600 bar (approximately 8700 psi) gives you high resolution and accuracy for high-pressure tests in hydraulic systems.

Range 2
The second range measures from 0 to 60 bar (approximately 870 psi). This range is ideal for low-pressure hydraulic systems and oil pumps.

Range Pressure range Accuracy Response time Output scaling
1 0 to 600 bar
0 to 8700 psi
1% of scale 100 µs 1 V/100 bar
1 V/1450 psi
2 0 to 60 bar
0 to 870 psi
1% of scale 100 µs 1 V/10 bar
1 V/145 psi

What’s in the pack?

  • WPS600 pressure transducer
  • Carrying case
  • USB cable
  • BNC to BNC cable
  • User’s Guide

Nothing compares to the WPS600
It is not unusual to require a different pressure transducer for each diagnostic test you want to run. The WPS600 eliminates this need by giving you one ultra-high resolution transducer that can be used for a multitude of hydraulic diagnostics applications. With two pressure ranges and a rechargeable Li-Po battery, all enclosed in a durable housing the WPS600 is the cost-effective answer to pressure analysis.

When price, performance and versatility matter, there is nothing that compares to the WPS600 Pressure Transducer.

Typical Uses

The WPS600 pressure transducer extends the features of the WPS500X to hydraulic systems associated with commercial vehicles and plant machinery. Allowing pressure up to 600 bar to be monitored against time enables the technician to connect the WPS600 to the relevant hydraulic test port, then view activity and transitions in hydraulic pressure that were never previously visible with conventional gauges.

  • Hydraulic pump performance
  • Hydraulic valve switching activity
  • Hydraulic pressure control valve performance
  • Hydraulic pressure decay
  • Residual hydraulic pressure 

WPS500X Manuals

Title Language Issue Size Updated All products All languages All documents Status
WPS600 Hydraulic Pressure Transducer User’s Guide English 5 313 KB Jul 27 2017 Pressure sensors English open

Industry Reviews

RATCHET+WRENCH recently published an article based on our WPS500X pressure transducer. Starring Matt Fanslow, of Riverside Automotive in Redwing, the article is a great read for anyone considering the purchase of our product.  As Fanslow says. “There’s nothing on the market that comes close to it.”.


Customer reviews

2 reviews | Add review

Robert Burgy
WPS600 Hydraulic Pressure Transducer

Being an automotive instructor, i get the benefit of using tools that would not usually be in an everyday shop. This hydraulic transducer is one of them. the quality of this one is the same as all of the other Pico test accessories. If you have used the WPS500. Then this will be the same. Theres just not enough space to talk about all of the time these save you.

Michael John Eilbracht
WPS600 Hydraulic Pressure Transducer

The local Community College that I instruct for Part Time got a 4423 Kit from Case New Holland on order and in the kit it comes with two of these Transducers.  Another instructor and me tried it out on a Bulldozer looking at the pressures of the blade going left to right with current clamps on the solenoids.  Wow!  It will show the pressures exactly as the pressure builds and dumps when the solenoids turn on.  This Transducer is on my wish list.  This unit is going to work great for testing pumps and valves.  Can’t wait to get one! Thank you Pico!

Your email address will not be published. Required fields are marked *