![PicoScope 7 Software Logo](/images/PS7-logo.png)
PicoScope 7 Automotive
Available for Windows, Mac, and Linux, the next evolution of our diagnostic scope software is now available.
Pico’s universal 6-way breakout leads eliminate the need to own many specific breakout leads for engine diagnostics. The breakout leads are available with four different sizes of connectors allowing you to connect to virtually any sensor in the engine compartment—of any vehicle—using just four leads. Never again will you need to search your workshop for that expensive vehicle/sensor specific lead.
The complete 6-way univesal breakout lead kit includes a set of 6 leads of each of the 4 different sizes listed above.
The breakout lead is simply connected into the existing cable loom, enabling voltage readings to be taken from the numerous sensors in the engine compartment.
The output signal can then be taken from the 4 mm banana plugs to the input of the automotive oscilloscope using one of our premium test leads.
Please read these instructions before using the breakout leads. Pico Technology takes no responsibility for any damage caused through incorrect use. These leads are designed to be used by experienced/professional automotive vehicle technicians who understand the implications of incorrect use.
The signal pins must be identified using wiring diagrams or other means.
It is possible to cause a short circuit or to cross signal wires if incorrect connections are made - please ensure the correct connections are made!
Any measurement taken is only as good as the connection you make to the device under test. The 6-way universal breakout leads will connect to a multitude of vehicle components regardless of connector arrangement. This will ensure you have a 100% successful connection, removing any doubt from your test results. A broadband oxygen sensor test is a typical example where multiple measurements are required for both voltage and current. The 4 mm banana terminals introduce a simple and secure voltage measurement point for your test lead, whilst a current clamp can be applied to any breakout lead to monitor current. The breakout leads can also confirm the integrity of the harness/component "terminal tension" by inspecting for "grip" of the breakout lead terminal inside the vehicle connector.
Title | Language | Issue | Size | Updated | All products | All languages | All documents | Status |
---|
Product | Price | Quantity | |
---|---|---|---|
![]() |
Foam tray for breakout leads and fuse extensions PA109 |
£32.00 |
|
Richard Davies
Complete 6-way universal breakout lead kit
Excellent bridging kit. I use these all the time now and find this method so much better than previous back probing! Highly recommend
Mark Savage
Complete 6-way universal breakout lead kit
The most useful tool in my kit.
Everywhere I’m working, people ask to borrow these for electrical diagnosis.
Also works well for pin drag testing.
dennis vandruff
Complete 6-way universal breakout lead kit
I really like using these jumper harnesses for checking waveforms on multiword sensors and actuators.
Especially when you need a current reading. Unplug the actuator and put this harness in series. There you go, now you can check voltages and
current. Very well built harnesses. Beware of knockoffs!!!
Your email address will not be published. Required fields are marked *