13/09/19
Categories:
 |
GT008 Air flow meter – air vane The purpose of this test is to evaluate the voltage output from the internal track of the air flow meter during engine idle, Wide Open Throttle (WOT) and over-run conditions. |
|
|
GT009 Air flow meter – hot film – turbo diesel The purpose of this test is to evaluate a hot film Air Flow Meter's (AFM) voltage output with a turbo-diesel engine during engine idle, acceleration and over-run conditions. |
|
|
GT017 Multi-point injection injector current The purpose of this test is to evaluate the operation of a multi-point port injector based on current flow, response, and formation during engine-run conditions. |
|
|
GT036 Crankshaft position sensor inductive, referenced, voltage during cranking The purpose of this test is to evaluate a Crankshaft Position (CKP) sensor’s inductive, referenced, output voltage during engine cranking. |