Typical applications:
| Engine | Typically +20 to +120 deg C |
| Heated seats | Typically -10 to +40 deg C |
| Car heaters | Typically +0 to +50 deg C |
The specification of the TA395 is
| Attribute | Published specification |
|---|---|
| Combined length of lead and probe | 2.85 m |
| Maximum voltage and CAT ratings | +-30V ref PC Ground, not CAT rated |
| Hardware Resolution | 0.5 deg C |
| Measuring units | Deg C and Deg F |
| IP rating | Sensor plus 1st meter of cable sealed to the equivalent of IP67 |
| Measuring range | -40 to 125 deg C |
| Calibration / zero offset requirements | On start up |