PicoBNC+ Automotive 10:1 Attenuating Test Lead (TA506)
Description
The compact design of the TA506 contains the entire attenuator circuit of a traditional oscilloscope probe, but within a 4 mm connector body. With a fixed x10 attenuation it is intended for high-speed signals like CAN, FlexRay and also for higher voltage signals such as primary ignition.
The TA506 is automatically recognised by PicoScope software when connected to the scope. This accessory is only available for PicoBNC+ and will not work with older PicoScope models.
The TA375 10:1 switchable 100 MHz Oscilloscope probe remains available for PicoScope Automotive BNC scope owners.
Specification
| Probe characteristics | TA506 |
| Attenuation ratio | 10:1 |
| Bandwidth | 20 MHz |
| Rise time (calculated) | 17.5 ns |
| Input resistance | 10 MΩ ±2% |
| Input capacitance | 33 pF ±1 pF |
| Max. working voltage | 400 V pk |
| Total length | 2.85 m nominal |
| Weight | 100 g |
Customer Reviews
Share your thoughts
If you’ve used this product, share your thoughts with other customers
Write a review
Showing to of results
- ...