PicoBNC+ 2000 A AC/DC current clamp

The PicoBNC+ 2000A AC/DC current clamp (TA388) is designed for automotive technicians who need to measure high currents up to 2000 amps without cutting, disconnecting, or stripping wires. Simply clamp the jaws around the cable and plug into your PicoScope — the clamp auto-configures and ranges automatically, making starter motor current draw testing and alternator output diagnostics fast and non-intrusive.

The TA388 has a specification to match our popular TA167 200A/2000A clamp but fitted with a PicoBNC+ interface. The clamp can be auto-configured by PicoScope software when connected to the scope. Ranging is carried out automatically with no user switching required. The clamp is powered via the scope and therefore does not require any batteries. Additionally, the clamp is auto-zeroed whenever connected to the scope.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA388 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually but requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.