3-Pin Kostal Connector Breakout Lead — VAG Sensor Testing
Description
This 3-pin Kostal connector breakout lead is designed for automotive technicians testing cam sensors, crank sensors, and injectors on VAG group and other vehicles. It connects inline with the existing wiring loom, allowing non-intrusive voltage and current measurements with Pico Technology's PicoScope automotive oscilloscope using TA125 to TA128 premium test leads. For example, this allows both injector current and injector voltage to be captured.
Note: the test lead is required to convert the 4 mm banana plug connection on the connector breakout leads to a BNC connector suitable for plugging into the PicoScope.
Connecting the connector breakout leads
Please read these instructions before using the connector breakout leads.
The signal pins must be identified by wiring diagrams or other means.
Regardless of the number of pins, Pico connector breakout lead colours are manufactured as follows:
- Pin 1 - Green
- Pin 2 - Red
- Pin 3 - Blue
- Pin 4 - Yellow
- Pin 5 - White
- Pin 6 - Black
It may be possible to cause a short circuit to the oscilloscope unit if incorrect connections are made! A short circuit could seriously damage the unit and will require it to be repaired at your own cost.
Customer Reviews
Share your thoughts
If you’ve used this product, share your thoughts with other customers
Write a review
Showing to of results
- ...