3-Pin AMP Superseal Connector Breakout Lead
Description
The 3-pin AMP superseal connector breakout lead by Pico Technology enables automotive technicians to test sensors and actuators without piercing wires. Connect this breakout lead between your PicoScope and AMP superseal connectors found on fuel injectors, throttle position sensors, and other engine components to measure both voltage and current simultaneously using TA125-TA128 test leads.
Note: the test lead is required to convert the 4 mm banana plug connection on the connector breakout leads to a BNC connector suitable for plugging into the PicoScope.
Connecting the connector breakout leads
Please read these instructions before using the connector breakout leads.
The signal pins must be identified by wiring diagrams or other means.
Regardless of the number of pins, Pico connector breakout lead colours are manufactured as follows:
- Pin 1 - Green
- Pin 2 - Red
- Pin 3 - Blue
- Pin 4 - Yellow
- Pin 5 - White
- Pin 6 - Black
It may be possible to cause a short circuit to the oscilloscope unit if incorrect connections are made! A short circuit could seriously damage the unit and will require it to be repaired at your own cost.
Customer Reviews
Share your thoughts
If you’ve used this product, share your thoughts with other customers
Write a review
Showing to of results
- ...