2-Pin Deutsch DTXX-2 Connector Breakout Lead — Truck Diagnostics
Description
The 2-Pin Deutsch DTXX-2 Connector Breakout Lead from Pico Technology enables truck technicians to test cam sensors, crank sensors, and other 2-pin truck engine sensors without cutting wires. Connect the breakout lead inline with your sensor harness, then measure voltage and current simultaneously using your PicoScope automotive oscilloscope. The breakout cable gives access to the individual wires to allow probing with current clamps. For example, this allows both injector current and injector voltage to be captured.
Note: the test lead is required to convert the 4 mm banana plug connection on the connector breakout leads to a BNC connector suitable for plugging into the PicoScope.
Connecting the connector breakout leads
Please read these instructions before using the connector breakout leads.
The signal pins must be identified by wiring diagrams or other means.
Regardless of the number of pins, Pico connector breakout lead colours are manufactured as follows:
- Pin 1 - Green
- Pin 2 - Red
- Pin 3 - Blue
- Pin 4 - Yellow
- Pin 5 - White
- Pin 6 - Black
It may be possible to cause a short circuit to the oscilloscope unit if incorrect connections are made! A short circuit could seriously damage the unit and will require it to be repaired at your own cost.
Customer Reviews
Share your thoughts
If you’ve used this product, share your thoughts with other customers
Write a review
Showing to of results
- ...