CartThe Pico range of automotive accessories are ideal for use with Pico Automotive Diagnostics Kits and Automotive Oscilloscopes, and other labscopes.
- Clips - a wide range of clips
- Current clamps - for when you need to measure currents without breaking the circuit
- Ignition probes and accessories - items designed to help you test the ignition systems of vehicles
- Pressure sensors - sensors that enable your PicoScope to measure pressure
- Probes and sensors - a range of probes including our Coil-On-Plug probe
- Software and training aids - software, books and videos to help with automotive diagnostics
- Test leads - general purpose test leads, and breakout leads
If you are involved with more specialised R&D work you should also consider the TC-08 thermocouple data logger for measuring temperatures up to 1800 °C, and the ADC-11 data logger for multi-channel data logging.
Probes and Sensors
Acupuncture Probe Set (TA008)
The TA008 is a back pinning probe
First and foremost the TA008 is a back pinning probe. In fact, it’s the smallest diameter back pinning probe that we know of. This is essential for probing today's small, fragile connector. It is also very sharp, so it slides past connector seals with ease. This product solves most of the problems associated with traditional back-pinning methods.
The TA008 is a piercing probe
Secondly, the TA008 is a piercing probe. Its small diameter, extra sharp pin makes it ideal for piercing the insulation on small gauge wires where traditional piercing tools might cause damage.
The TA008 is field repairable
And finally, here's the best part. Don't you just hate it when you are using a back pinning probe and it bends or breaks? Before the TA008 came along, this meant that you had to buy a whole new back-probe. Not with the TA008; it's repairable. If the pin becomes damaged or useless in any way, simply take your pocket screwdriver, remove the set screw, pull out the old pin and install the new one! There's no need to replace the whole probe.
Contents:
- 5 Complete acupuncture probes
- 5 Replacement sockets
- 5 Screws
- 30 Replacement needles
Coil-On-Plug Ignition Probe (PP338)
Designed to save you time, effort and money, the Pico Coil-On-Plug Ignition Probe is the fastest way to test both conventional and coil-on-plug secondary ignition systems.
The Pico Coil-On-Plug Ignition Probe eliminates the need for back-probing or any dismantling — to use the probe simply press it against the coil.
FirstLook™ Engine Diagnostic Sensor (TA014)
The FirstLook Engine Diagnostic Sensor connects to the exhaust or vacuum side of the engine to be tested and offers a fast and accurate method to diagnose automobile engine problems such as burnt valves, bad injectors and other performance problems without major disassembly of the engine.
The FirstLook sensor is particularly suitable for use with a Pico automotive oscilloscope, but can also be used with most other modern lab scopes.
The FirstLook Engine Diagnostics Sensor kit comprises of the following items:-
- FirstLook Diagnostic Sensor
- 25 ft (7.6 m) cable - BNC to BNC cable
- 45 inch (1.1 m) cable - BNC to banana jack plugs
- BNC to BNC adaptor
- Vacuum line adaptor
Email
Help!